SS Hoses

• Tube: Hydraulic Oil resistant special Synthetic Rubber
• Reinforcement: High Tersie steel 1 Wire Based
• Cover: Oil, Abrason and weather resistant wrapped synthetic rubber
• Application: For high pressure hydraulic system in industry and agriculture

ID		OD	WP		BP		BR
Inch	mm	mm	nAr	PSI	BAH	PSI	mm
3/16	4.5	11.5	250	3625	1000	14500	90
¼	6.4	13.4	225	3263	900	13020	100
5/16	8	15	215	3118	850	12325	115
3/6	9.5	17.4	180	2610	720	10403	130
½	12.7	20.6	160	2320	640	4780	180
5/6	15	23.7	130	1885	570	7540	200
¾	19	77.7	105	1545	470	6090	290
1	25.4	35.6	85	1276	350	5075	300
1.1/4	31.8	43.5	63	915	250	3525	420
1.1/2	38.1	50.6	50	725	200	2900	500
2	50.8	66.7	40	580	160	2320	630

• Tube: Hydraulic Oil resistant special Synthetic Rubber
• Reinforcement: High Tensie steel 2 Wire Based
• Cover: Oil, Abrason and weather resistant wrapped synthetic rubber
• Application: For high pressure hydraulic system in industry and agriculture

 

 

ID		OD	WP		BP		BR
Inch	mm	mm	nAr	PSI	BAH	PSI	mm
3/16	4.5	13.4	415	6018	1650	23925	90
¼	6.4	15	400	5800	1600	23200	100
5/16	8	16.6	350	5075	1400	20300	115
3/6	9.5	19	330	4785	1320	19140	130
½	12.7	22.2	275	3988	1100	15950	180
5/6	15	25.4	250	3825	1000	14500	205
¾	19	29.3	215	3118	850	12325	240
1	25.4	38.1	165	2393	650	9425	300
1.1/4	31.8	48.3	125	1813	500	7250	420
1.1/2	38.1	54.6	90	1305	160	5220	500
2	50.8	67.4	80	1160	320	4640	630

This range of Teflon hoses is fabricated from optimum quality raw materials and is engineered with high precision. The Teflon tubes are reinforced by single layer of stainless steel wires. These hoses can withstand heavy temperature and pressure and are highly used in chemical, refrigeration and plastic industries.

Specifications:

SELECTION CHART
SIZE
ID IN INCHES	3/16”	1/4”	5/16”	3/8”	1/2”	5/8”	3/4”	7/8”	1”
ID IN MM	4.8	6.4	7.9	9.5	12.7	15.9	19.0	22.2	25.4
OD IN MM	7.8	9.5	11.0	14.3	16.1	19.4	24.0	28.2	31.5
Working Pressure in PSI	4000	3000	2650	2500	2000	1750	1500	1250	1000
Testing Pressure in PSI	8000	6000	5300	5000	4000	3500	3000	2500	2000
Min. Bend radius in mm	50	70	100	133	165	200	275	325	400

Applications:

Diluted or concentrated acids, caustics, hot, lacquers, solvents, fuel, oils, oxidizing agents, gases, foods, drugs, generally unaffected by all chemical (expect melted alkaline metals) used in Laundry, Rubber, Plastic, Chemical & Refrigeration Industries.Maximum Utilization of steam pressure 250 PSI Also available in S.S. Braided with corrugated Teflon Hose for 1.1/2”, 2”, 3”.

Tube : Black oil resistant synthetic rubber.
Reinforcement : Aeroflex - 1 : Single G.l. wire braiding.
Aeroflex - 2: Single G.l. wire braiding over cotton braiding.
- Suitable for Low and Medium pressure applications for hydraulic oil, fuel lubricating oil, water and air.
Operating Temperature : - 40° C to + 12O°C

Specs:

Hose ID		INDO EXXON 1		INDO EXXON 2
in.	mm	Working Press. PSI	Testing Press. PSI	Working Press. PSI	Testing Press. PSI
3/16	4.8	500	1000	800	1600
1/4	6.3	450	900	750	1500
5/16	8	400	800	700	1400
3/8	9.5	325	650	600	1200
1/2	12.7	300	600	500	1000
5/8	16	275	550	400	800
3/4	19	225	450	350	700
1	25.4	200	400	300	600
1.1/4	32	150	300	250	500
1.1/2	38	125	250	200	400
2	50.8	100	200	150	300

A range of metallic flexible hoses are manufactured in SS AISI 304, 321,316 & 316-L conforming to BS 6501: Part 1:1991 / ISO 10380: 1994

Stainless steel corrugated flexible hoses are offered from 6 mm NB (1/4") to 200 mm NB (8"). The annular corrugated hose body provides the flexibility and pressure tight core of the assembly. We also manufacture highly flexible close-pitch hoses for special applications

When Pressure is applied, unbraided corrugated hose tends to elongate axially. To restrain this, an external layer of SS wire braid is provided. The braid also makes the assembly pressure resistant. Some times two or even three layers of braiding are provided for high pressure applications. The braiding is highly flexible and follows the movement of the hose.

The braid is normally manufactured in SS 304 wire. However SS 316 and SS 321 braid can also be manufactured. We also supply wire braid in different configurations as per customer specifications.

Advantage of Flexible Metal Hose

• High physical strength combined with light weight. t Suitableforwidetemperaturerange(-2700C to + 700°C )
• Good corrosion resistance.
• Resistance to fire, moisture, abrasion and penetration.
• Absorbs vibration and noise from pumps, compressors, engines etc.
• Compensates for intermittent or constant movement. 1 Compensates for thermal expansion or contraction of piping. 1 Correctsproblemsofmisalignment.
• A Flexible and quick alternative for rigid piping in difficult locations.

Application : For uses on Hi-Temperature ???uids and steam.

Construction :

• Tube : Steam and heat resistant EPDM rubber.
• Reinforcement : 1 high tensile steel wire braid.
• Cover : Synthetic rubber - heat, abrasion ozone and weather resistant
• Temperature Range : Upto I 85° C

Application : For uses on Hi-Temperature fluids and steam.

Construction :

• Tube : Steam and heat resistant EPDM rubber.
• Reinforcement: 2 high tensile steel wire braid.
• Cover : Synthetic rubber - heat, abrasion ozone and weather resistant.
• Temperature Range : Upto 200° C

Oil Suction And Discharge Hose Dock and Offshore Operations-

CONFORMING TO IS ; 8189 -1976lBS 1435/ea

Application: This hose is specifically manufactured for  dock and offshore operations of petroleum
products containing not more than 25% aromatic hydrocarbon content.

Construction

Lining : Uniform lining of suitable rubber compound, resistant to all grades of petroleum and blended products having aromatic hydrocarbon content not more than 25%

Reinforcement

Plies of Natural or synthetic woven fabric rubberised with a suitable compound and two helical GS wires, (as per IS 280/78) embeded in the case of smooth bore and in rough bore hose, the first is internal and the second is embeded.

Electrical Bonding

A Copper wire comprising of a number of strands is embeded between the reinforcement plies to provide electrical continuity along the whole length of the hose.

Cover

Chloropreme rubber outer cover having plain or corrugated cloth marked finish, resistant to oil, abrasion and weather.

End Connection

The hose has built - in nipples with or without flanges as per customer's specificaton.

Tempperature : - 40°F to + 200°F - Length 3.65 Mtr. 5 |vm., 10,Mtr. 15 Mtr.

Specifications:

ID In Inchs	ID in MM	Work Pressure
3/16"	5.O MMX1	12.5
1M"	6.3 MMX1	12.5
5/16"	8 MMX1	12.5
5/16"	8 MMX2	17.5
3/8”	10 MMX1	12.5
3/8”	10 MMX2	17.5
1/2”	12.5 MMX1	12.5

- Special Resistance to Pressure By Delivery & to Absolute Vacuum by Suction.
- In side & out side smooth surface
- Very flexible & Light in Weight
- Resistant to atmospherical agent, Oil & most Chemicals.
- Strong Abrasion Resistant.
- Very Narrow Bending Radius.

• STRUCTURE : SOFT PVC HOSE WITH EMBEDDED STEEL WIRE REINFORCE.
• COLOUR : CRYSTAL CLEAR TRANPARENT HOSE
• TEMP RANGE : -10°C to 60°C

(FOOD GRADE, NON-TOXIC VACUUM HOSE)
ID MM	OD MM	ID INCH	PRESSURE KG/CM2 AT 27°C		Bending Radius MM	VACUUM mH2O	VACUUM mmHg	COIL LENGTH MTR
			W.P.	B.P.
12	18	1/2”	6	30	50	9.5	720	25/50/100
15	22	5/8”	6	25	60	9.5	720	25/50/100
19	26	3/4”	6	23	80	9.0	680	25/50
25	33	1”	6	20	100	9.0	680	25/50
32	41	1-1/4”	6	18	130	8.5	640	25/50
38	48	1-1/2”	6	18	155	8.5	640	25/50
50	62	2”	6	18	200	8.0	600	20/40
64	79	2-1/2”	4	12	260	6.0	450	10/20
75	92	3”	3.5	10	320	5.0	380	10/20
100	118	4”	3	9	430	4.0	300	10/20