Rexroth

Product Details:

The directional valves of type WE are solenoid-actuated directional spool valves that can be used as electro-magnetic component. They control start, stop and direction of a flow. The directional valves basically consist of the housing, one or two electronic solenoids, the control spool, and the return springs.

Product Details:

Pressure valves of type DB and DBW are pilot-operated pressure relief valves. They are used for limiting (DB) or limiting and magnetically unloading (DBW) the operating pressure. The pressure relief valves (DB) basically consist of the main valve with main spool insert and pilot control valve with pressure adjustment element.

Product Details:

Pressure relief valves of type DBD are direct operated seat valves. They are used for limiting a system pressure. The valves basically consist of sleeve, spring, poppet with damping piston (pressure rating 25 … 400 bar) or ball (pressure rating 630 bar) and adjustment type.

Product Details:

Pressure relief valves of type DBD are direct operated seat valves. They are used for limiting a system pressure. The valves basically consist of sleeve, spring, poppet with damping piston  (pressure rating 25 … 400 bar) or ball (pressure rating 630 bar) and adjustment type.

Product Details:

The valve type Z2FS is a twin throttle check valve in sandwich plate design. It is used for the main or pilot flow limitation of one or two actuator ports. Two throttle check valves aligned symmetrically to each other limit flows in one direction and allow free return flow in the opposite direction.

Isolator valve type Z2S is a pilot operated check valve of sandwich plate design. It is used for the leak-free closure of one or two actuator ports, even during longer periods of standstill.

Product Details:

4-port, spool type, solenoid operated, directional control valves with wet armature AC or DC coils.

Product Details:

The valve type WEH is a directional spool valve with electro-hydraulic actuation. It controls the start, stop and direction of a flow. The directional valves basically consist of the main valve with housing, the main control spool, one or two return springs and, as well as the pilot control valve with one or two solenoids “a” and/or “b”. For unobjectionable functioning, the hydraulic system has to be bled properly. 

Product Details:

The valve type ZDR is a direct operated pressure reducing valve in sandwich plate design with pressure limitation of the secondary circuit. It is used to reduce the system pressure. The pressure reducing valve basically comprises housing, control spool, compression spring, adjustment type and an optional check valve. The secondary pressure is set via the adjustment type.

Product Details:

Two stage pilot operated construction. These valves  are normally open type  valves.  When  the  pressure  in  the  secondary  port( port  A ) increases to set pressure

Product Details:

The flow control valve type 2FRM is a 2-way flow control valve. It is used for maintaining a constant flow, independent of pressure and temperature. The valve basically comprises a housing, a rotary knob, orifice bush, pressure compensator and an optional check valve

Product Details:

The directional valves of type WE are solenoid-actuated directional spool valves that can be used as electro-hydraulic component. They control the start, stop and direction of a flow.

Product Details:

The isolator valve type SV/SL is a pilot operated check valve for subplate mounting or threaded connection. It is used for the leakage-free blocking of one actuator port, also in case of longer standstill times.

Product Details:

The isolator valve type SV/SL is a pilot operated check valve for subplate mounting. It is used for the leak-free blocking of one actuator port, also in case of longer standstill times.

Product Details:

Type WM.. valves are mechanical, manually actuated directional spool valves. They control the start, stop and direction of a flow. Directional valves basically consist of housing, one type of actuation (roller plunger, hand lever, rotary knob), control spool, and one or two return springs.

Product Details:

The isolator valve type Z2S is a releasable check valve in sandwich plate design. It is used for the leakage-free blocking of one or two actuator ports, also in case of longer standstill times.

Product Details:

It is the central task of external gear pumps to convert mechanical energy (torque and speed) into hydraulic energy (flow and pressure). To reduce heat losses, Rexroth’s external gear units offer very high efficiencies. They are realized by pressure-dependent gap sealing and highly precise production technology. Rexroth external gear pumps are built in four frame sizes:

Product Details:

The key task of external gear pumps is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure). To reduce heat loss, Rexroth external gear units are designed to be extremely efficient. This efficiency is achieved through pressure-dependent gap sealing and high-precision manufacturing technology.

Rexroth external gear pumps are available as standard gear pumps in the 4 series of B, F, N and G and as SILENCE gear pumps in the series of S, T and U, in which the displacements are graded by different gear widths. Further configuration  variants are given by different flanges, shafts, valve arrangements and multiple pump combinations.

The key task of external gear units is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure). In external gear motors this is the other way round. These machines are required to be highly efficient in order to avoid unnecessary heat.

The key task of external gear units is to convert mechanical  energy (torque and rotational speed) into hydraulic energy (flow and pressure). In external gear motors this is the other way round. These machines are required to be highly efficient in order to avoid unnecessary heat. This efficiency is achieved by means of precision production engineering and pressure-sensitive gap sealing.

Product Details:

The key task of external gear units is to convert mechanical  energy (torque and rotational speed) into hydraulic energy (flow and pressure). In external gear motors this is the other way round. These machines are required to be highly efficient in order to avoid unnecessary heat. This efficiency is achieved by means of precision production engineering and pressure-sensitive gap sealing.

Product Details:

Rexroth external gear pumps are available as standard performance gear pumps in the series W. The displacements are graded by different gear widths. Further configuration variants are given by different flanges, shafts, valve arrangements and multiple pump combinations.

Product Details:

The key task of external gear pumps is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure). To reduce heat loss, Rexroth external gear units are designed to be extremely efficient.

Product Details:

Prior to project design, please see our technical data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable fluids) and RE 90223 (HF-fluids) for detailed information on fluids and operating conditions.

Product Details:

Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids), RE 90222 (HFD hydraulic fluids) and RE 90223 (HFA, HFB, HFC hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions.

Product Details:

The A4FO pump is designed to be used in open circuits. The axial piston unit must be filled with hydraulic fluid and air bled during commissioning and operation. This must also be observed following a longer standstill as the axial piston unit may empty via the hydraulic lines.

Hydraulic pumps, type PV7…A are direct controlled vane pumps with variable displacement. The basically comprise of the housing, cover, rotor, vanes, stator ring, pressure spring, adjustment screw and control plate. For limiting the maximum flow, the pump is fitted with an adjustment screw.

Product Details:

The key task of external gear pumps is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure). To avoid unnecessarily high heat losses, units with high efficiencies are sought after.

We have an offer of a broad range of hand operated valves which is made of high graded raw materials and are well admired in the market due to their high tensile strength, durability and precision engineering designs. These are offered in both sub plate type and threaded type and various models.

Specifications:

• Model: CETOP 3 , CETOP 5 & CETOP 10
• Flow Capacity: 0 to 53, 120x300LPM
• Pressure Range: 0 to 315 bar / 700bar
• Mounting: Sub Plate Type Threaded Type
• Type: Spring Return, Detent Type

Product Details:

Pilot operated Check valves model CL allow free flow in  the  direction from  Port A to Port B and offer leakage free closure in opposite direction.

Product Details:

Type PV7 hydraulic pumps are vane pumps with variable displacement. They consist essentially of the housing, rotor, vanes, stator ring, pressure controller and flow adjusting screw. The annular stator ring is fixed by the small floating stroking piston and the large floating set piston. The ring is fixed at a third location by the height adjusting screw.